AshComputers

Hey guy's, I've been engineering, programming for 28+ years. I've tested tons of forums out over those years, and the best running,anti-spam,server usage, etc. etc. etc. i here http://www.phpbb.com/ It's the best I've used for years and years. Also the spam software inside the board is a huge plus, maybe BJ could get a break Just though I'd try to help you guy's out after all the help I've received with my new play toy LP 24 lol

Welcome, I'm in N.C. as well. Where you at in N.C. ?

If it's legal, I'd pay in a second. It's a great idea, just have to watch the copyright stuff though, don't think the owners would smile to big on that one! But if it's clearing the copyright stuff, I'd pay. Thanks

Yeah, those are the ones that I was speaking of, 14 bucks a piece :- Oh well, guess I'll have to raise the cost margins. Thanks for all your help

ashcomputers

Ok, I've tried every format known to mankind, AI. EPS, etc etc etc I saved my file in Coreldraw as an .EPS and other and can't for the life of me get Signcut to open it. Any suggestions, except for the obvious nuclear bomb on Coreldraw... lol I also have Flexisign, but am not going anywhere near this Laserpoint 24 with it since I saw when I bought it it WAS NOT compatible with Laserpoint 24. Thanks for any help in advance

hehehehe yup, thanks a million for dem theer faqs weeeeeeeee

Canada is part of the U.S.? It's a state? You know that's a lie!!! Canada is not a part of the U.S.!!! Everytime we tried to make you guy's a state, you would jump on those mounted horses and run away!!!! eheheehehe Joking with ya lol YOUR MY LONG LOST MOUNTED COUSIN!!!! WAIT TIL I TELL MY MOM!

AshComputers I've never won anything, but what the hey. I'm in too!

heheeheh I think he plugged in the serial cable and away it went. I've had my LP for 2 to 3 weeks and this thing flies!!!!!! Talk about a great cutter for the price! You have to READ and see what everything says.... use a SERIAL CABLE, and DO NOT use Flexisign with it. Signcut ROCKS!!!! Inkscape and SBE also!!!!! READ BEFORE YOU JUMP TO CONCLUSIONS PEOPLE!!!! I bet 99.9% is user ignorance!!! My 2 cents

Yeah Those guy's are the best. I'll sure give them a huge thumbs up. Along with BJ and the rest of the guy's on this forum. They really frickin rock!!!!!!!! I can get my vinyl a few bucks cheaper, but let me tell ya, you can't beat the speed from USCutter man, I did the same as you. Looked up and there it was, I was like, huh....... ehehehehe Thanks USCutter!!!!!!

Ok, well, that didn't do it either... ahhh never had a program i couldn't open something with. Wonder if it would do me any good to ask signcut to expand their extention usage.... naaa not going to try it lol Thanks for the help

I'm importing from Coreldraw x4, and that might be the issue.... bitmap leftovers. I'll check that out Thanks for the help guy's! Much appreciated as well P.S. What's the best way to strip out the bitmap?

I'm new, but not new. Sorry I forgot about this page before I started posting. I've been reading this forum for around 4 months or so. I've been in computers for 28+ years. Programming, engineering, etc. etc. etc.. You guy's are GREAT! I love every little bit of information I have received from here. I have a retail shop in N.C. and I just don't dive right in on something before I do my research. That's the only reason I purchased from USCutter, because of you guy's. BannerJohn you rock man!!!!! And if noone hasn't told you in awhile... YOU REALLY ROCK! I learned alot of this from you! People ask you questions and I see them never reply or just leave this forum, and I see you just keep helping and helping!!! I'm more than sure they never forget you either. I sure won't! Thank's to everyone else, feel like I know you guy's... wish I did know some of you in real life, you seem to be so awesome! I love people, yes there are some that are short tempered, but hey all of us are ignorant in some way or other or we wouldn't be humans! Anyhow, thanks so much for all you do!

Now that made my night hahahahaahah I was looking at what you guy's were saying and I was waiting on the shift button part, then all of a sudden 22 chimed in, it was unexpected and made me spill and spit coffee all over the stupid floor (Had to get big mop) hahahahaha Man, you just made my day BIGTIME! lol :'( :'( P.S. I mopped after choking half to death on coffee I didn't get out of my mouth in time, thank goodness it was on tile floor or the misses would have choked the rest out of me lol

I have been reading this forum for around 4 months now. You guy's are great at helping people!!!!! That's the reason I decided to buy a cutter from here. Thanks for the help you guy's give!

Alright! This will work great!! Thanks a million! Hey I found another calculator for vinyl and the guy wanted an outragous amount of money per month for it....... this is great!

hahahaha oh yeah. Dirty Dicks Place is a hoot to. Where u at in n.c.?

You guy's are hilarious. You guy's keep thing's alive all the time. What a hoot! lol

Hey BJ, if I would go 30 minutes across the border I would need a piece of vinyl wrapped around my head to breathe lol. I'm about 20 minutes from North Myrtle Beach in good ole N.C.

Where did Lara go??? This has me astonished. All this over a $1.00 sticker. What a mess the U.S. is in. It's rediculious. Glad you posted this Lara and hope you get back soon. And hope your doing fine from the surgery. Good people being ran over by huge firms is what kills me. I could see if they were starving to death. I own Dewalt and B & D and I can assure you I will NEVER buy one thing from them again. We have several hundred of their products and all they did by doing this is shoot themselves in the foot! The first thing I would have done is call the local paper and then contacted world news companies online and made the biggest issue you ever saw over this! Geezzz I mean your advertising for them hhaahaah PLEASE OH PLEASE use my logos and print them at your own cost to give me "FREE ADVERTISING"!!!!!! Oh... and btw, don't e-mail me and ask for my permission either because I love other customers to see my companies name posted everywhere in the world so people can see. Anyhow I'm done venting, good luck to you Lara