spudgal

Good morning! I am looking for a Christian fish symbol. Does anyone have one? Thanks! Jackie

Perfect! Thank you so much! Jackie

Does anyone have geese? Thanks! Jackie

Good luck Lexi starting your new business. I started mine in May when the company I worked for foir 15 years did a roll over. I just completed our local county fair and received a ton of business plus passed out over 500 business cards. So that might be an option for you. As far as the cardstock for scrapbooking goes this is how I do it. Take a piece of vinyl backing (you know the part you just throw in the garbage?)and give it a light coating of spray adhesive and put your cardstock on it so it sticks. Put it in your machine and cut away. I always clean my blade afterwards. Jackie

Good morning everyone! It has been forever since I posted but I do have a couple of questions. There is a new RV storage being built in town and the owner wants a quote on a large 4ft x 8 ft sign to announce their coming to town. What would I use for a sign that large? All I have ever done is inside stuff. My second question is: a rock group wants a sign down the outside of their tour bus, do I seal the edges with a sealant? Thanks for the help!!!! Jackie

Thank you!!

Great job! I used a really stiff brush when I put a logo on a trailer and that helped to mold around the "bumps and curves". Jackie

Everytime I come to the forum it seems to be asking for help. When I first started to look for a cutter I went online looking for over a month. I had ran across US Cutter and saw the forum and went in and looked around and I loved how everyone was so helpful to everyone and was so upbeat. I kept looking for the perfect cutter and I was continually drawn back to US Cutter and I would go into the forum and read around. I had decided which machine I had to have just by the forum because I figured if a machine had that kind of support group that is where I wanted to be. Thanks US Cutter for such a great forum and thanks forum for always being there! Jackie

That is great. Enjoy spoiling your new baby!

to a concrete wall or cinderblock wall? I have a school that wants large quotes put on their walls but they are concrete with paint. Thanks! Jackie

Thank you!

A great source for fonts is fontfreak.com.

Thank you!

Hi! I am excited to learn everything I can from you guys. I have been lurking for a couple of weeks waiting for my machine to come. Well it came and I didn't put it up until the vinyl I ordered arrived. I was excited to start figuring it out yesterday when to my dismay it is missing the top of the knife, the adjustment screw. I sent an email to service but haven't heard from them yet. I live in a small town in southern Idaho and am looking forward to being part of this forum.

I don't know if this is a PCut question or a SignBlazer question but the other night I was cutting a sign and wanted six copies so I clicked the copies button and everything mapped out ok but when I click cut it just sat there. I checked everything out but still nothing so I deleted 5 of the copies and it cut great. I moved the blade over to the next start position and it cut great again so I clicked on 4 copies and it wouldn't cut. I could only cut them out 1 at a time. What do I need to do to cut multiplies? Jackie

I did try two but it wouldn't cut.

software and material to cut the invisible car bra. Does anyone know where I can find it? Thanks! Jackie

I am working on a sign and went to adjust line spacing. There is no such thing in the text dialog box, in fact my text dialog box looks nothing like the one in the help section. I have several areas greyed out on buttons. Is this not the full version that came with our cutters or am I doing something wrong (which is more than likely! LOL!) Thanks for your help! Jackie

What a night! I sent my sign to the cutter and I ordered six copies. It mapped it all out and then refused to cut. I checked all of my settings, checked my baud rating and everything was where it should be it just wouldn't cut. After messing around for a while I got frustrated and just shut everything down. I went back to my room turned on the cutter and tried to cut a test patch and it just said "Waiting" so I turned it off and went and cleaned, something I do when I am frustrated. After I calmed down I went back in and sent three copies to be cut, same thing so I clicked finish and sent 1 sign to the cutter. It cut beautifully except the machine sounds like a moose in mating season. I changed my orgin same thing, it cut beautifully. I did it a third time and on the fourth time it wouldn't cut. My baud rating had changed so I changed it on Sign Blazer and it cut. Cut out all six signs and went to weed them...the first sign weeded great not the 2nd one, in fact it will have to be recut. I weeded the 3rd sign again great, not the 4th, 5th - great, not the sixth. So in other words everything on the right of the cutter is great everything on the left cut too shallow. Errr-r--r-r. Cleaned some more. Went back in and designed a saying that will go on a tile. Changed my vinyl, ran a couple of test patches for depth and sent it to the cutter. It cut out the details great started on the lettering and on the bottom it started to peel the letters up. Really am ticked off now, shut the machines down, went to bed. And now I am pleading for help. What am I doing wrong? Thanks for helping me out, again! Jackie

Thanks Jerry! It works great! I do know what paired kearning is but not glyph. Jackie

I received the same email reply as Popeye so I tried to change it around. It doesn't fit the other way! Any suggestions?