livingagain75

Members
  • Content Count

    54
  • Joined

  • Last visited

Everything posted by livingagain75

  1. livingagain75

    Buy A Keyspan When You Order

    Awesome, thanks for your help Mz SKEETER. Much appreciated.
  2. livingagain75

    Buy A Keyspan When You Order

    Yeah Mz Skeeter I was, I was unaware of the adapter as I bought my cutter second hand and wasn't given one. Thanks for pointing that out. Too bad I didn't know sooner I could of saved on the shipping. Does US Cutter sell the part?
  3. livingagain75

    Buy A Keyspan When You Order

    Hi I went ahead and ordered the keyspan (arrived today) and the screw connectors are stopping the 9 pins from plugging in. I have a photo but don't see where to upload it.
  4. livingagain75

    Re: Contour Cutting in Flexi 10 Starter with a Laserpoint

    Cool I just ordered one from USCutter, and a couple other supplies. Thanks for your input guys.
  5. livingagain75

    Re: Contour Cutting in Flexi 10 Starter with a Laserpoint

    Thanks, I just checked its hooked up to a Sabrent serial connection. Does that make a difference? Cause now that I think about it it was waiting for a while, then after a minute of pushing the arrows it moved to the second registration. I checked the connection a couple of times thinking that might be it.
  6. livingagain75

    Re: Contour Cutting in Flexi 10 Starter with a Laserpoint

    Yes I do have the older Laserpoint. I think today I will experiment with the different drivers. I thought I was onto something when I switched to the Creation P-cut 630g driver and the alignment window appeared. But was disappointed when I realized that the arrows wouldn't move the cutter. The cutter just said waiting. And yes I would love to upgrade to a Graphtec.
  7. livingagain75

    Re: Contour Cutting in Flexi 10 Starter with a Laserpoint

    I'm in the same boat as you Gifts United, I am trying to contour cut with Flexi 11 Cloud using my LP24. When I get my job loaded and press send it goes strait to cutting if I use the LaserPoint driver. So I went ahead and loaded the Creation P-cut ct630g and finally got the alignment window to pop up. But unfortunately the arrows won't move the cutter. And the cutter says waiting. Actually after a minute of pushing the arrow it moved close to the second registration point. Has anyone experienced this?
  8. livingagain75

    Contour cutting with a Laser Point and JPSS

    Oops I just noticed I posted in the wrong section. I should have posted in sign blazer. Is there any way to move it?
  9. Hi guys, been a while since I've posted, and I was wondering if I can get some advice. I have a 24" USCutter Laser Point, wide format printer, and a heat press that I've been using for light color transfers with JPSS. Scissors are fine for the lights, but I would like to start printing with darks. On YouTube there's a video explaining the process using Sign Cut Pro and Inkscape. But I'm using Sign Blazer. Can this be done? What are the different steps? In the video he has 2 separate layers, 1 for the print and 2 for the cut lines. And then I would just use SBE to perform the print (adding registration marks), and then use the cutter to determine the location of the cut lines. Am I close? Are there any steps I'm missing or tips that anyone has? I would really appreciate it. Thanks in advance.
  10. livingagain75

    I ran out of Oracle 751 but still have 651

    I want to put new graphics on my Mustang but am afraid the 651 will harm my paint. The surface area will be straight and I will have the design on for 1 year. Thank you for your time.
  11. livingagain75

    I ran out of Oracle 751 but still have 651

    That's great cause I want to practice application technique with the different colors that I already have but was worried the adhesive would harm my paint job. Thanks Roger...
  12. I have a customer that wants the whole top of his car covered with vinyl but I only have a 24" cutter right now. Can I place the vinyl side by side and look professional? Or would I need to use one solid peace? Thanks, Bill
  13. livingagain75

    Full hood, roof, and trunk black vinyl for Mercedes.

    I will call them tomorrow, but your right Coaster, I'm sure that it will stretch enough to cover. @Ravenwind the hoods dimensions are 60 x 62". I have actually received samples of 3M in the past, which is one of the main reasons I want to go with them. Good customer service. Thanks guys for your input, Bill
  14. livingagain75

    Full hood, roof, and trunk black vinyl for Mercedes.

    I am wondering, how much can this be stretched? The hood is 60" wide and so is the 3M 1080 and the Oracle 970RA. Would this be able to cover the whole top? Thanks
  15. livingagain75

    P1010032

    Good work...
  16. livingagain75

    George and Ivy's 60th Anniversary

    A little something to add to the festivities...
  17. livingagain75

    George and Ivy's 60th Anniversary

    A little something to add to the festivities...
  18. livingagain75

    math clock

    Very creative, good work...
  19. For some reason when I go into my object manager to adjust the layers there is nothing there. Just an empty box. Does anyone know how to get my layer control back? Thanks
  20. livingagain75

    Can't see anything in Object Manager CorelDraw4

    Sorry guys simple mistake. right to the right of Object Manager there is a button that toggles between - and two little windows. When you click on the minus all of the layers disappear. Kind of had me stumped there for a minute. Common sense prevails... lol
  21. livingagain75

    Vehicle Graphics

    White and black has a 8 year warranty while the colored and transparent is good for 7 years, metallic 5 years.
  22. livingagain75

    Vehicle Graphics

    My introduction to the world of vehicle graphics.....
  23. livingagain75

    Vehicle Graphics

    Thanks, that was Oracle 751 Black
  24. livingagain75

    custom work

    So this must be somewhat transparent as well. Looks good...
  25. livingagain75

    This weeks racecar stuff

    Looks nice...