cegglestn

Does anyone have there own secret recipe thats similar to rapid tac2? Has anyone tried alchohol, soap, water?

I have been using Thermoflex for Hockey Jerseys but has anyone used Easyweed with good results? Also came across Vyroll vinyl has anyone used this vinyl before. Thanks and let me know.

Im looking for help vectorizing this jpg. I have all permission to use the logo. Need the vectorized image for the boys hockey team. I traced using inkscape but looks like crap

Im looking for help vectorizing this jpg. I have all permission to use the logo. Need the vectorized image for the boys hockey team. I traced using inkscape but looks like crap

Hi peeps, i have an eps file and i cannot get it to import into sb. Any help would be great... Logo-Octane.eps

Thank you!!!

How can i add more fonts???

k1hockey.com and kamazuhockey.com and of course hockeymonkey.com and hockeygiant.com depending upon sales of Reebok jerseys etc...

looking for some clean hockey vectors, examples: hockey sticks crossed with a puck in the middle hockey puck hockey silloutes hockey dad/ mom or any other vector graphics thanks egg

Need help so I can import this file for personal use I wanna make new stickers for my truck. Please help. Thanks trd_off_road_gray_0.ai trd_off_road_gray_0.ai

looking for the name of this font, is similar to helvetica ext bold but the R is different anyone help?? Thanks

Looking for the font name of these numbers. The 1 and 7 are about the same size in H" but the 9's are larger and are open faced. Any help would be great. Thanks

please.... Looked forever!!!

its not working at all anyway to get it to work? I have used it before I reinstalled SB now its not working.

how do you copy n paste in sb? That file wont import either

Need some help finding this font, cant seem to find it anywhere. Please help..

thanks for the help!!!! been looking forever.

works thanks for the help!!!!

Please help... WardenShieldLogoInverted.eps WardenShieldLogoInverted.eps

notta there

looking for a grandpa and grandma stick figure, anyone out there have any? Thanks

I have an older pcut with usb only connections and a laptop with only usb connections. I ran into problems with SB freezing and vinyl being wasted. I have used my cutter in the past without a stand, was on a table, I purchased a stand because it was more practical and easier. I got the stand mounted the cutter on it and purchased a new laptop. This is when all the problems started. I thought it was the new laptop since my old cpu had the registered copy of SB on it and with the laptop i was using the trial version. Problems occured with SB and the Cutter for months, so I finally dug out my old cpu and hooked it up and yep even with the registered copy of SB it kept freezing and vinyl being ruined. So I troubled shooted and searched the forums for help, even contacted uscutter support. With no luck and SB freezing all the time, I thought to take the cutter off the stand and put it back on the table for now to see if that made a difference. Sure as Sheeet it didnt freeze up all day cutting up an order of 400 decals with cutting 50 at a time. So the problems must of been when the cutter was grounded, I read the forums when people suggested grounding the cutter I just had to laugh because when the cutter is mounted to the stand via the screws it becomes grounded, metal stand, metal screws hmmnn. Anyways with people having bad luck and with SB freezing all the time take it off the stand and put it on the table and see if that works for you because it def. worked for me. Headed down to home depot and im gonna make a wooden stand. egg

im using the creation pcut with usb only

all i can say is it had to do something with the stand, as soon as I took the cutter off the stand all the freezing problems dissapeared

It seems when cutting large jobs like a vector thats say 12X35" it cuts 3/4 of the way than stops. I never had a problem before cutting that size but now its a problem. Its like the machine runs out of memory and the small box in SB that goes with the cut outline stops and the cutter cuts and when it reaches that mark the cutter stops as well. Usually the small box in SB will stop till the cutter catches up and it proceeds but now it just freezes. Is there a setting to automatically clear the memory or a setting that I missed when changing computers?? Thanks