Briguy

Have you grounded your cutter ? If not I highly suggest you do .

Hi, I've had this model for years and running great with Sign Blazer . I recently bought by friend's MH721 and it's fine with small jobs . I've been trying to figure out what the deal is . Smaller stuff like 3x3 and 12x12 it great . I'm trying to cut a number that it 11.5x60 and its starts out correctly but everytime time the blade goes all the way left until it hits the side . Tried changing the cutter settings to design size and still does this. I don't get why it's doing this and never had a problem with my old 721 . Thanks for any help .

My new cutter came yesterday with Vinylmaster and quickly realized I couldn't use my sbd files . Panicing at first lol , this morning thanks to this thread I was able to get back to work . Thanks !

What my budget allows until I get the money for a Graphtec in a few months .

Tried pen test and tried with nothing in the carriage. Just brought it back to my friend and ordered a MK2 to use until I get the $ to buy a Graphtec.

Stand and cutter are grounded, tried drier sheets in my vinyl rolls as well

Haven't tried with the pen, I don't have any paper big enough .

Yes, it starts out fine then its cutting the image towards the left . I always set it to cut from right and press the origin button before sending file to the cutter .

Years ago I bought the memory upgrade for my MH cutter . Now, I am using a friends until I can get my Grsphtec . Looked to order the memory upgrade and US Cutter doesn't have them anymore . Anyone know I can get it ? Only found one other place and they are out of stock .

I've had great success with my first mh . Didn't have one issue with it . Got this from a friend to get by until I can get a graphtec .

I'm going to Graphtec as soon as I get the $ . Hopefully a month or so .

Know anywhere I get get it ?

Ive reinstalled SB and double checked my settings and still seems to do it

It`s checked

This is the original MH 721 , the current memory board is WS628128LLPG-70 .

Hi , I have a MH 871 that I been using SB for the past few years and been great for what I do . Except recently during bigger projects , vehicle lettering , signs , and banners the cutting process tends to freeze up on average 1 out of 3 cuts . I thought it was my SB so I removed it and installed a different version and still does it . The memory has been upgraded on the cutter and it is grounded (had static electricity issues) . It`s been a great cutter just acts up now on bigger projects and can`t figure it out and gets frustrating wasting vinyl . HELP !

Thanks , I`ve been using my laptop but think my desktop will be going back downstairs and get a serial cable .

Thanks for the reply , why does running a serial over usb perform better ? Just curious

Hi , I have a MH 871 that I been using SB for the past few years and been great for what I do . Except recently during bigger projects , vehicle lettering , signs , and banners the cutting process tends to freeze up on average 1 out of 3 cuts . I thought it was my SB so I removed it and installed a different version and still does it . The memory has been upgraded on the cutter and it is grounded (had static electricity issues) . It`s been a great cutter just acts up now on bigger projects and can`t figure it out and gets frustrating wasting vinyl . HELP !

Is ther a way to use SB to crop a SBD file I already made ?

I have scanned a few things and converted over and made a SBD file but would like crop it as a SBD file .

Is there a way I can layer a SB file on top of another ?

There is no Append , File + Open .

Hi , is anyone aware of a handheld scanner that can scan an item and measure the dimensions along with the curves ? A friend told me he seen one at a shop for making wraps but I can not seem to find anything close . Thanks

Yes , Thank You !