Rachaelrt0123

Members
 View Profile  See their activity

  • Content Count

    25

  • Joined

  • Last visited

Posts posted by Rachaelrt0123

  12. Posted

    these should only really take about 2-3 minutes to produce on your own. take a look at this eps and see if it does the trick

    I could not find a good image of the decal. I looked for it on Google Images and found it a few times but it was always on a jeep and I knew it wouldn't work well with Signblazers. When I did find a good one, it did not vectorize right. Thank you SOOOOO much for the file!

  22. Posted

    I have a side buisness making signs, decals, magnets, etc. with my PCUT630. My father (a.k.a. buisness partner) are stumped as to how to price things. I read the forums on here and see that people advise to be consistent. With the customers we get, it would be impossible.

    Here's a scenario:

    One customer (Stan) wants just words. Another customer (Billy) wants the same words as Stan and a complicated logo. While Sarah wants an easy logo, and the same words as Stan and Billy. All customers used the same amount of material (Billy and Sarah made their words smaller than Stan's) How would you price these three jobs?

    Does anyone have a pricing chart they would maybe like to share for my father and I to base our prices on?

    *All people are fictional except for my father.

  23. Posted

    I have my workspace set up to be 20 inches tall. When I put my 'Y' gridlines on, Signblazers ignores the decimals. I want .5 grid lines, but SignBlazers gives me '5' gridlines. They work sometimes, and don't work other times. I tried it on my other computer and it's doing the same thing. Any idea what could cause this and what could be the solution?

    I have attatched a picture of what the grid lines look like when they are set to be '.5.'

    post-10816-0-36034800-1312318477_thumb.p

  24. Posted

    Thank you for your advice.I tried cutting a job and it was too deep. We re-compared my blade with a credit card and found that there was too much blade sticking out. We adjusted it and put it back into it's place. We got a job and it gradually cut deeper as the carriage moved to the left. So we believe the track for the carriage is not level. The carriage is on track with it's tracks but the tracks are not level. Thank you again, I appreciate it!

  25. Posted

    have a Creation PCut 630. I cut a job and my blade cut too deep. I took my blade holder out and replaced my blade with a brand new one. Then I compared how much blade was out to how a credit card. My blade was sticking out half of the side of a credit card. I put my bladeholder back in it's spot and cut something little. I cut good, so I proceeded to cut a big job. When I weeded that, I found that is was not cut conistently. What I mean by this is that in some spots it cut too deep and in some spots it did not cut enough. I have not used the plotter since. Can anyone tell me why this happened?  .

    [move]Please Help[/move]

    [glow=red,2,300]Thank you in advance![/glow]

    [shadow=red,left]Rachael[/shadow]