zorp

How to calibrate the plotter?, NOT the software.

blade 45º CutSpeed030mm/s CutPress 180g (depends the vinyl type) Up_Speed030mm/s Baud Rate 9600 Size of design: 2.7559in x 3.2662in

Thank you for your responses. I will try to complete the information -FlexiSign PRO 10.5.1 -The depth of the blade is equal to half the thickness of a credit card. -For the test cuts I am using the leftover vinyl, in this case I am not using rolls. CutSpeed030mm/s CutPress 180g (depends the vinyl type) Up_Speed030mm/s Baud Rate 9600

I have this problem, the plotter does not cut the designs well. The original design has symmetrical lines, but after cutting they are different, I modified the overcut and offset and there are no changes. *I show a picture. If in the middle of the design "vertically" we draw an imaginary line, the left side is different from the right side, be it a small, medium or large design. *(In all cuts) Specs: Uscutter MH721-MK2 FlexiSign. Windows 10 Will there be any solution? Thanks