DC5Javi

Alright I will try that out. I don't know if its a big difference but the blades I use are a generic version of the oem's so I am not sure they are wearing out to quick or I have it to much out. I'll check those out as well. Thanks!

Well in general the whole plot was all off and cut wrong. Usually if its just 1 or 2 I would thing it would be the design but it happened to all of them like that but looks worse towards the left side. I actually lowered the speed down to 20 right now and seems to be working fine and having no issues, but we will see when I get through the end with this roll.

Do you think the material I am using might be a little heavy to cut and require more push rollers? I use avery 2923.

So I have it strong on the ends and medium in middle. Speed is about 40.

Hi, I wanted to reach out and see if you guys know what is happening with my graphtec plotter. It seems to be slipping on the left side of my push roller, like if it is not gripping enough. There is nothing wrong with the pressure on them and as well with the grip rollers. In the picture I have its suppose to be cutting within the black but it slides off and cuts wrong. Do you have any clues to why that is. As of right now I only have 3 push rollers on the machine and doing perf cuts. Thanks!