dvddvd

It's a design where some of the parts are layered on top of another vinyl but lots of the different coloured layers are in a space and not touching another layer so printing would not be an option. Its worked doing the layers wet but it took some time to do....thanks

Hi thanks so are you saying that only paper application tape is suitable for doing layers wet? The items are to be sent to a customer fully layered and for him to just fix the pre layered piece? Would it be easier to layer in the vertical position. I tried removing the full backing piece but found it impossible to line up on a desk when dry? Thanks

Hi all, How would normal vinyl look if you mirrored cut it and then stuck it to the inside of a window viewed from the outside ? So you would be viewing the adhesive side ? thanks

Thanks will do

it would be used on a piece of perspex which is on a lightbox. I could stick it to the front of the perspex but was thinking ofsticking it to the inside of the perspex

Hi I googled how to add extra weeding lines to a piece ready to be cut and found this from a few years ago... I sent file to cutter etc and can add a weedbox but can not find how you can double click on the edge to add more? Am i on the right track? thanks

Hi all, I can add registration marks to my work in the final cut page, but wondered how i could add them earlier? I would prefer marks to be not so vinyl wasting so closer to my work piece? I can add some stars in my design to act as marks but when it goes to cut they are only on the colour you add them has? Is there an easy way to say add 4 stars and then for them to appear on each colour you are about to cut? thanks

thanks that works a treat

Hi many thanks I will have a look...I have the DSR version so should be on there?

Trying to size the design to be as big as poss, If im using 610mm vinyl what size would the max be, leaving some room either side? Or can i nearly cut the full 610mm ? thanks

many thanks

Ok thanks

Hi sorry there dont seem to be a Liyu brand in the list? Just had a play around with it and i ran a long piece through, it was ok but the biggest problem seems to be getting it in square with the machine? 1mm out of square and by the time it gets to the other end its drifted quite a bit. So i squared it up the other way and it was a lot better. Ive stuck a piece of tape between the edge of the machine and the vinyl so im not trying to square up a 2 inch gap with the tape its 1/2 gap now?

It's the Liyu DF 631 cutter I have with servo motor thanks

Do people usually cut a piece of vinyl a little longer than their logo etc, or leave full roll on rollers and pull some out so it's free from the roll and cut at end?

Ok yes good idea so use the directional buttons to move it to the end of the piece. I remembered when I was looking at software I tried a few different free trial copies and one of them had lots choices of different ways how it cut I can not see anything on vinylmaster? Thanks

Hi what do you mean by pre jog ? Thanks

Any tips on aligning the vinyl before you start to cut? How do you avoid drift? Thanks

A two question post.. If I want more weeding lines on my piece not just the ones Vinyl Master generates can I just put lines across my piece and then weld it and would it just cut the extra weed marks and not the ones passing through my work? Also when I use registration marks they are always too wide and waste a lot of vinyl? Is there anyway of moving them? Or do people just add a few stars as registration marks on their work and not use the generated ones?

Ive made up a multi layer graphic and it all looks fine, when I send to cutter it shows all the different colour layers ready to cut. But when i try to group all the layers so i can alter the size of it all at once 2 of the layers disapear?

Ok thanks will do I wont bother with the generated ones as they put them wide thanks

Ok thanks but the registration marks option appears just before cutting and it appears on a pop up window which is not editable? Or do you mean add them to your design manually before the cut screen?

Hi thanks I did have another look before I posted the file and did find a small dot to top right hand corner, I deleted it and thought that must me it? But the box didnt get any smaller. I've changed colour and magnified it to max but can not find anymore?

Hi heres the file thanks fault.vDoc

Thanks I'll upload it when I get home?