termagator

Members
  • Content Count

    30
  • Joined

  • Last visited

  • Days Won

    2

termagator last won the day on February 15

termagator had the most liked content!

Community Reputation

6 Neutral

About termagator

  • Rank
    Advanced Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. termagator

    Flexi 8.5 help needed

    I saw that when I was weeding it out, almost decided to cut the P & R's free- hand, also could left the B unweeded. And thanks for your help as well darcshadow
  2. termagator

    Flexi 8.5 help needed

    Been wanting to cut this for 2 weeks
  3. termagator

    Flexi 8.5 help needed

    Look whose back in business, sliceand dice , haumana & MZ SKEETR, thanks for your help. I could tell your patience was running low. The key was the send now. I went back to the 1st pic where I showed a shot where you could see the drop box, it showed " send now" but every one after that said hold. I've used a bootleg copy of flexi 7.5 since 2007, and when that was no longer available, I got this flexi starter 8.6 maybe around 2013. I have never noticed that send now drop window, seems like a stupid thing to have, especially when I hit send, I'm gonna want it sent now. I'm not a very computer savy person but I learned a little from the 3 of you. Also I think some of the pictures were maybe misinterpreted from time to time, like one yesterday, I was trying to show that I only had com 2&3 in production manager setup. When I took that pic one of the USB were highlighted because it's the 1st one in the list.
  4. termagator

    Flexi 8.5 help needed

    Checked the allow remote send now box and it still holding
  5. termagator

    Flexi 8.5 help needed

    Where can I find send now? This is flexi 8.6 starter
  6. termagator

    Flexi 8.5 help needed

    Sorry to report, null modem cable didn't work either. Still production manager just goes to holding. D.M is set on com 2 P.M. setup is com2 In D.M. when I go advance settings to change com port 1,2&4 are open sez 3 is in use. When I go to P.M. to make a setup, it only gives me a com choice of 2 or 3, there is no longer a com 1 or 4. I suspect I got some kind of computer problem. It's been doing the blue screen recovery stuff a couple time today alone. Thanks for all the help but I'm giving up on the com connection
  7. termagator

    Flexi 8.5 help needed

    Ok thanks null modem cable will be here tomorrow evening. Some one had asked what changes had happened prior to my computer not talking to the vinyl cutter. Here's what it did...did it again last night, and again today. Flexi comes up, but all internet browsing kinda slow
  8. termagator

    Flexi 8.5 help needed

    Haumana, would this work also?, I could get it faster and wouldn't need an adapter
  9. termagator

    Flexi 8.5 help needed

    Ok MZ SKEETR, your saying I should keep the Tripplite Keyspan cable, and buy a null modem cable, that plugs into the male end of the Tripplite, but then it will be OK to use a male to male null modem adapter because cutter is female also? Thanks for your patience.
  10. termagator

    Flexi 8.5 help needed

    Here's the back of my pc, it's a all n one
  11. termagator

    Flexi 8.5 help needed

    On my 1st attempt to cut with this cable, the com port was set on com4 and I had com4 was the only set up in production manager. Is this not a null modem serial cable? I used the link from this thread to purchase it. Here's my cable going into the vinyl cutter. The pic showing the production manager is a screen shot from the earlier video.
  12. termagator

    Flexi 8.5 help needed

    Here's the back of my pc, it's a all n one. Here's my serial cable
  13. termagator

    Flexi 8.5 help needed

    1st couple pics are outta sequence but you probably can figure it out Here you go, I'll try to get photos in right sequence
  14. termagator

    Flexi 8.5 help needed

    I was kinda thinking that. Yesterday when I was trying the other non null modem serial cable, it was saying come 3 was available. When I try to change the port to 3 I get this
  15. termagator

    Flexi 8.5 help needed

    Installed cable driver, it set up on com4. Reboot computer before I tried my cut, still no luck. Also it sez com 3 is in use? 20240211_143856.mp4