April51

I am a fit frustrated and disappointed. I have owned my cutter since 2015 but have only used it about 2 times, maybe 3. Today I went to make something for a friend and noticed the belt was hanging a bit. But because I never use it, I never thought much of it. I went ahead and click cut and the cutter would only cut in a straight line. I immediately canceled the cut noting the belt was dangling. I touched it and it fell into my hand. Turns out the belt was chewed in half on the right side. see pics. there is a big chunk missing. This makes me think it was not installed properly from the beginning. My question is. how do I reinstall it once i purchase the belt located here https://www.uscutter.com/index/page/shopping_cart/actions[ShoppingCartModule]/remove_item/cart_index/0https://www.uscutter.com/index/page/shopping_cart/actions[ShoppingCartModule]/remove_item/cart_index/0 ALPBELTSHRT Are there any videos on how to install this properly because I don't want to have to buy another belt. I feel like I shouldn't have to purchase this one because of the lack of use on this machine but realize it has been a few years since the purchase. Help would be good.

Yep did that earlier, but I figured out how to do it. and found the link to the belt. https://www.uscutter.com/Belt-short-for-SC-and-TC-Series-Vinyl-Cutters I think that is the one I need. SC-E Vinyl Cutting Plotter Classic 31.5" w/laser SC801

I figured out. I just tore the whole thing apart and put it back together. Thanks for your support. Guess I'll order a belt. I have a feeling that is going to be fun to get on. I will make a youtube video. If for nothing else a good laugh.

The link takes me to an error page. AccessDeniedRequest has expired3002019-04-15T00:08:40Z2019-04-15T00:34:51Z0DF39E36759F5FBAYynwAnTG+6ZU8ltcP9G0OnCWob+sJQR9ftV+dL7hHHSBEI+1xEMHIItwUpeb2ffhTB4mieiHhZU=

I think the belt runs into the black crossbar because when the tension bar dropped after the belt broke I pulled a great deal out of the tension bar area. Dakaoa, I the cartridge has never come off. Except now because I took it off and can't get it back on LOL.. I just want to make sure I can put this thing back together before buying a belt. thanks, Guys. Cardudenc If you can help me with how the belt should go on, I would appreciate it a bunch.. Maybe I should make a youtube video putting it back together. Might be hilarious.

think something is defective with this machine. this screw is hanging by a tip, I took the picture and it fell completely out. I'm glad I took the picture so I could see where it was supposed to go. But it will not screw in. It's just literally hanging by a tip. this is the right side fastener belt I presume. But there is no way to use it. It's just dangling. Then you can see where it was getting chewed up on the right side wheel. I have only used this machine to make vinal letters for 1 sign and 2 stencils. Something is definitely not right here. I don't know how to fix the issue with the belt the tension belt. If I buy another belt there is no way to make that work, It would fall from the machine again. So say I get the tension pully installed (which I didn't because the screw hole is not big enough) and I purchase a belt. how do I get it through the black crossbar? do I need to take the top control panel off too? I'm a girl! thinking I should have just got a cricut. but didn't know such a thing existed back then. Please help. This machine is definitely defective.