RichB

I worked with the calibration and reset the overcut. I believe that this is more of an issue with the image than the cutter. None of my other images have this problem.

Checked it and it was a bit off so I recalibrated. Still not right, but the sizes are correct now. Thanks!

The machine cuts fine, but what I'm finding is that that beginning and end of the cut don't meet. they over shoot leaving a sliver of material that needs to be cut manually.

As far as I can tell everything is set in vinylmaster.

I've been messing with this all weekend. If I take the blade offset to zero it cuts the part of the decal I've been having trouble with perfectly, but doesn't cut other portions of the image completely. I still can't figure out what the first cut is perfect and the rest have an issue.

Vinylmaster

This is probably a newbie thing, but I thought I'd ask before I go nuts. I have a small design that a cut a ton of. The first cut is always perfect. The rest have a 1/4" overcut at the top which leaves a sliver with a 1/32" offset. It wouldn't be a big deal if I were only doing a couple as I'd fix it with a razor knife and move on, but I need to cut 50 at a time. Any thoughts on how to fix this?