Robert2495

Members
  • Content Count

    14
  • Joined

  • Last visited

Everything posted by Robert2495

  1. Hello, i am just wondering if graphtec blade lifespan would be shorter if used for perf/die cut of thicker ( 6 to 8 mil with laminatiin) laminated vinyl stickers. And does a 60° blade make diecut easier and better asking since i dont have any 60° blade to test out
  2. Can someone tell me what the other tool holder in a graphtec ce6000 series is for, and can it be used for a perforation cutting in a printed vinyl?
  3. Thank you so much, will read the manual thoroughly next time
  4. My plotter has a 2nd slot and the manual that came with my plotter does shows the dual slot tool holder but does not show how to use it for a perf cut, and when i used the 2nd holder it cuts in the wrong area, i assume i have to select the tool holder from the settings which i couldn't find.
  5. Im from India and my ce6000 got both 2nd hole and the perft cutting channel, but i couldnt find any "tool selection" options/setting which i think would let me used the 2nd holder for the perf cutting (Coundn't find it in the manual).
  6. Thank you, this guy used the pen holder for perforated cutting, but when i try it out, it cuts in the wrong area, do i have to change the tool holder through the settings? if so from which setting
  7. Robert2495

    Vinyl bowing issue

    will try thr 1.5" spacing. Vinyl is almost completely flat, a little natural bowing, and somtime when it scans a registration mark it shows " off scale" but still proceeds to cut and the result is not accurate at all.
  8. Hello, I'm currently using the Graphtec CE6000-60 and whenever i'm cutting and the size of the project is around or longer than 2.5 ft, the viny/media would bow (photo attached). Only cutting is not much of an issue but when i do a print and cut job, the cut sometimes are not alligned with the printed images which i think is due to the bowing of the vinyl/material( In smaller media like A4 sizes i have no issues). I would be very thankful if someone could help me out.
  9. Robert2495

    Vinyl bowing issue

    No I haven't made any adjustment
  10. Robert2495

    Vinyl bowing issue

    I manily use LG vinyl and for print cut 3m vinyl.
  11. When i do a contour cutting on my Graphterc ce6000-60 the display always show 'off scale' while it scans a registration mark and it cuts slightly off the printed graphics.. i arrange every thing and give registration mark from corelDraw and Export it in tiff file and print it on my large format printer and cut it from corel using cuttingmaster3. But when i print directly from coreldraw to my epson L805 printer on a4 heat transferpaper it shows 'off scale' but it cut perfectly on where i want to cut.Am i Doing something wrong or is there anything that i am not doing.
  12. Robert2495

    Contour cutting error

    HERE ARE THE PICS. ALSO, WHEN IT SCAN THE REGISTRATION MARK THE DISPLAY SHOWS 'OFF SCALE' AND CUT SLIGHTLY OFF THE PRINT EVEN THOUGH IT DETECTS THE REGISTRATION MARK
  13. I have a graphtec ce 6000 (2ft) plotter, and whenever i do a long sheet(vinyl) cutting and when the cutting process reached the end of the vinyl the vinyl sqeezed in the center between the pinch roller making the viny bulge in the center.. because of this reason i get an error in contour cutting. how can i solve this