Leaderboard

Signblazer and Inkscape are free

Depends which supplier you purchased it from? Which edition you have? If from USCutter please go here: https://fcws1.com/usc.htm

Just cut my first letters...perfect...Thanks..

Dakotagrafx, I am not a Photoshop guy. I'm not even a designer. A long time ago, I bought a cheap cutter (and a heat press) and thought I was going to retire making banners, t-shirts, stickers, etc. But, life happens and it all ended up in storage until recently. He came by and asked me what it was. I told him and he asked if I could make some decals. So, that brought me to today. I guess if I'm going to play with this stuff again, I need to brush up on designing skills or put someone on retainer (LOL).

Any time you unplug/plug a USB device (i.e. cutter, printer, flash drive, scanner, etc.), Windows might assign a different ComPort number. Whatever computer you are wanting to use to send the file to the cutter, I suggest you check the Device Manager and see what number was assigned and make sure that it matches the number in the software that you're using.

Thank you so much! I will look them up and order

I really don't have a formula for extra colors. I usually ad a little more $ depending on how much vinyl and time is involved and how good a customer they are.

Just a quick tip for arcing texts --- do some kerning prior to the arc, as letters may tend to collide (or, be too far spread out) while rotating around the circumference (inside or outside of the arc).

At the top of your layout screen is HELP>HELP TOPICS.. Plenty of info there. Look up TEXT> Arc Text.

Well I had a titan3 and a stepper motor...I’ve had rolandsp540,Roland pnc2300a Roland 300...2 -Toyota 850 embroidery machine ,Royal 55 inch laminator,hot Tronix presses..epsons 2200 and 2200 sublimation, work horse 6 color 4 station... i did this on the side than all the mom pop shops opened and of coarse the cric ,I set back watch them all fuss over wh to go to now....I’m in a very small community...I guess people that I was getting rich... but yah Facebook ask who and of coarse they have 30 locals now....comical see all the shoddy work.... I’m just trying to get back and make pocket change...probably could make a lot more with just phone calls I’ve learnt along the way and not even touch anything

for $200, you got a steal.

You didn't mention which other UScutter vinyl cutter that you had. But the blade offset on a Graphtec vinyl cutter is ZERO. A Graphtec has a servo motor, and may be night and day better if you had a stepper vinyl cutter before. If that cutter was taken care of, you got a great deal on it.

we almost never see components fail - over the last 10 years maybe seen 3 mainboards as opposed to hundreds for the mh series. other than that the only thing they need is new blades, occasional cutting strip and keep them out of the rain

Your welcome