Leaderboard


Popular Content

Showing content with the highest reputation on 05/22/2019 in all areas

  1. 1 point
    Just lick it and stick !LOL
  2. 1 point
  3. 1 point
    I added a small white border around the image and imported it into vinylmaster and it vectorized with no problem! THANKS!!!! Apparently if any part an image is close to or touching the edge vinylmaster does not vectorize it properly, even though other programs may vectorize it vinylmaster won't, by adding a small border around the image it worked like a champ! Thanks again skarekrow for the solution.....
  4. 1 point
    If do not need to contour cut, then you don't need the laser dot. To know which USB comm port you should be using, check your device manager in control panel, expand the USB stack and right click for properties on the one that your machine appears to be connected to, and that should tell you which com port windows assigned to it.
  5. 1 point
  6. 1 point
    I though you was saying Banned Hemp tape. I know how you guys from Florida are....
  7. 1 point
    Re-Save your Original image in a Bitmap Program like Photoshop or Gimp as a .jpg with a slightly larger background so that the Black in your Example Image does not touch the outside edges of the Background. Alternately, you could remove the white background in a bitmap Program and save as a .png with a TRANSPARENT background and Trace in VinylMaster.. Then, Vector Trace.
  8. 1 point
    We do not know which version of Laserpointer you have. The first Laserpointer was a CreationPcut with a laser on it. 2nd was a Laserpointer 2 which was made by Liyu. The laser is for manual contour cutting. After you print your design with registration marks, you jog the carriage head to each printed registration mark and record in your cutting software. You would need a printer that prints on vinyl for that. Drivers and instructions can be found at the UScutter.com website under SUPPORT. Fuse> You hope if the cutter gets an electrical charge, that the fuse would blow and not hurt the vinyl cutter.