Leaderboard

  1. bikemike

    bikemike

    Members

    • Points

      4

    • Content Count

      1,038

  2. darcshadow

    darcshadow

    Super Moderators

    • Points

      3

    • Content Count

      3,048

  3. mfatty500

    mfatty500

    Members

    • Points

      3

    • Content Count

      1,161

  4. slice&dice

    slice&dice

    Members

    • Points

      2

    • Content Count

      6,722

Popular Content

Showing content with the highest reputation on 01/28/2019 in all areas

  1. 3 points
  2. 3 points
    darcshadow
    As a MH owner I can attest they are not a very good cutter, however, they can be tweaked to cut pretty decent for a hobbyist. Software will not help with your problem of cutting funny or vinyl slipping. The only way software can help the cutter is if the software has the ability to set blade offset and over cut. Adjusting blade offset will square up the corners and adding a bit of over cut will ensure cuts close completely. I suggest we pick one problem to start with and trouble shoot it, then move on to the next one. Setting blade depth, speed, and pressure will be the first steps to getting the cut right. On mine I have my speed set to 120 and pressure to 70.
  3. 2 points
  4. 2 points
    bikemike
    Detective, first class, Skeeter at work again. LOL
  5. 1 point
    Dakotagrafx
    one is from michigan and one from germany - looks like a copy and paste - so different people. generally graphtec won't sell you a mainboard and you have to buy it from a supplier/dealer so I would contact where you got the board from
  6. 1 point
    MZ SKEETER
    There are settings that need to be adjusted after replacing a main board. I cannot find a service manual for the CE6000-60 But maybe this one for the CE5000 can help you. That error is the pinch roller error. The pinch rollers need to be aligned in the grit roller area. I turned mine off day 1 in Background settings. http://www.graphteccorp.com/support/manuals/CE5000/CE5000-UM-251 (09-9370).pdf
  7. 1 point
    slice&dice
    THIS one is a working link (from this very thread above)
  8. 1 point
    slice&dice
    For anyone that is having troubles with getting their value cutter to work, the following LINK installs the cleanest version of the No-Trial SBE. http://www.uscuttersupport.com/downloads/Software/SignBlazer/signblazer_setup.exe For SC, use the LIYu, for LaserPoint II, you can select the Creation PCut CT630 and for the MH MK2, just choose RedSail or Copam CP-2500 during setup. Just wanted to have this link out there, since people keep trying to use older (broken) download pages, or versions that have the nag screens, and this version eliminates all that.