Leaderboard


Popular Content

Showing content with the highest reputation on 11/28/2018 in all areas

  1. 2 points
    Well I finally figured it out. I believe I actually had two issues. The spotting / trash I believe was actually moisture. I normally leave my paper in the printer tray and I have never had this problem before. I used some paper from the pack and I also placed some packing paper in the sandwich to absorb some of the moisture. Came out almost perfect except a little ghosting. I've never noticed the ghosting before but I believe it has always been there. I've never done a straight black on white print so it was not evident. Took me a bit of thinking to figure out what was causing it. My press is one of the "auto release" types. When it releases it does with a 'thud'. By holding the handle firm when it released, the ghosting disappeared also. So my margin is slim on this run but I learned a couple of valuable lessons. Thanks for all your suggestions and help!
  2. 1 point
    Yeah, most on here that have had something over 24" typically say it wasn't worth it and a 24" cutter was more than big enough for their jobs. It comes down to what you plan to cut with it though. If you plan to do really big signs the 34 might be the way to go. Keep in mind though, big decals are a big pain and often times a design can be broken down into smaller more manageable pieces.