Leaderboard

CHEAP We try to steer people away from MH series cutters. Go with at least a SC2. You get what you pay for in vinyl cutters. Servo motors are better at cutting small details. A value cutter is night and day to a servo cutter. When you think about a price so cheap, that is the quality of the machine. The only time I have heard that cutter name is the above OP. Read the reviews on 'THE RIVER" site. Also only Windows from what I read. The MH has limited memory, bad tracking, very prone to static problems and communication problems. Where are you buying it and who is supposed to be your tech support?

Ms skeeter takes all the credit for this. This is the correct way to set your blade depth. To start with, you should set your blade depth correctly, by taking the blade holder out of the machine, and firmly cut across a piece of scrap vinyl, you will be cutting. You should only be cutting the vinyl and barely a mark on wax paper backing, Adjust blade to get there, Then put the blade holder back in machine, and use the force of the machine to get there, same results, only cutting the vinyl and barely a mark in wax paper backing. You should just barely see and feel the blade tip out of the blade holder.