Leaderboard

Clean cut blade is in and I used 1/2 the pressure and almost no blade as suggested. My cutter was running Chrome at a pressure setting of 300, I started at 150 and ended up at 145 making perfect cuts. Combine that with the offset issue that was fixed by calibrating my cutter to the software and...BAM!!! Cutting perfect! The most trouble i had was with the punisher skulls I did for my boys party. I couldn’t get them any smaller than 1” without eyes and nose holes and teeth not cutting right... just for giggles I made some at .6” and they look awesome! Btw, the eyes on that are tiny but the nostrils are almost too small to weed with a pin...

I personally use a second blade holder and after I have used my cleancut first in the primary holder for regular vinyl I move it to the metallics, glitter holder as that will eat any blade up faster and I want my regualr vinyl to always be trouble free. that way I get double duty out of the cleancut blades too as you generally do not do as fine of cuts with metalics

I’ve have this Laserpoint 2 since July and you can go back and look at the issues I’ve had... my offset was never quite perfect, and the overlap was causing issues sometimes leaving little .2mm slices into the design that sometimes causes a catastrophe when weeding. Then I ran some simple rectangles and found out (after $30 of Reflective was cut undersized) that my scaling was off. On a 1” square it was off.. it was .96x.97”. It doesn’t seem like much but when I recalibrated it in the software, all the other issues went away. This should be a test you run when you get your cutter or you are having problems.

I actually only do chrome and Reflectives in my little niche so I’m a blade eating machine!!!

Lol! I'll try. They're always trying to save a $. I order 12" and 24" RTape. What did I get? Yeah they changed the order to 2 rolls of 48" and told me to cut it to however big I need it to be because that's cheaper than buying different sizes.

Not to mention my kids will have the coolest projects in school

I know they work great for wall art printed decals banners and depending on the paper they will work for outdoor signs indoor displays and posters. They also print awesome photo's and enlargements.All I know $400 for a 2500-3000 grand printer is a steal and I can put $ back from all the stuff this machine will do and buy a high dollar printer pretty much for a song .

Here is what my settings are. In scalps, when you use the text feature you have to go to TEXT and then convert text to outlines, From there you can scale it to the proper size you need it to be,Its just like in ai Its not a vector till you convert it..Im also sending a ticket to craftedge on this ..