Leaderboard


Popular Content

Showing content with the highest reputation on 09/21/2016 in all areas

  1. 2 points
    Found the problem.!!! A gentleman on youtube helped me name Alaskan Wild posted a video on replacing the USB port, here's what he said. For the freezing issue you may try the following. Open your device manager and while the cutter is on. You should see the COM port the cutter is using, say COM3. Right click and uninstall this. Unplug the USB cable and then turn off the cutter. Got to ftdichip.com . Go to DRIVERS then VCP DRIVERS. There will be a table there then choose the operating system. If it is windows based then go to the right to SETUP EXECUTABLE and run this. If it is a Mac just click on the 2.2.18 depending on 32 or 64 bit OS. Run this. Then plug in the USB cable to your cutter. Next power on the Cutter and the COM port will reinstall. In the program try setting the BAUD RATE to say 38400. Most cutting programs ou can change this. Go ahead and try again. Now it works great, but the laser is still a question.
  2. 1 point
    We like the white stuff down here in the Wintertime, Warm Sand!! LOL
  3. 1 point
    The issue may be the carriage arm. It is a spring that should bounce back up between cuts. We tested it while it was off and it stayed in a down position. USCutter is sending a new cutter to us. We have to ship back the one we have and when they receive it they will send us a new one. They are covering shipping. Let's hope that it is as "simple" as they're making it seem.
  4. 1 point
    marck does double box and charges I think an extra $5 for that - I have never had a bad or broken mug from them but coastal has good products too I heard I have had other suppliers where it was not uncommon to find 4-6 broken mugs in a case - sometimes they replaced them sometimes not but also found that the cheaper ones the handles break easier. again don't think that will be a problem with coastal but I go for quality items - have a couple of customers that have bought hundreds of mugs over the past 6-7 years and keep coming back even though I am slightly more expensive than the cheapest places they can find. I know there is a big difference in the quality of the cheapest mugs to the best at both joto and conde
  5. 1 point
    Im using 4.048 scalps4pro.way better than scalps3 version.zero issues combines with Ai cs6 or cc. great perfect and flawless combo.
  6. 1 point
    Have you tried https://openclipart.org/ ? Do a site search and you will find many open source items related to food which can be modified for use. Respect your generous impulse.