Leaderboard


Popular Content

Showing content with the highest reputation on 11/09/2011 in all areas

  1. 2 points
    Kenimes: what year nissan? let me know and I can email you some wiring diagrams and help with diag. I do this for a living for the past 28 years. It sounds like you have an alternator problem but also could be a fuse in the charge circuit that may be blown. let me know and I will try to help. Rick BTW: I am in Washington State, south of Olympia
  2. 1 point
    If you are looking into getting into sublimation I would like towards Conde Systems and RPL Supplies for getting your setup and supplies. They have much more to offer for sublimation. photomugs.com also carries sublimation stuff, however, the presses they carry are chinese presses. They are cheaper but do not work nearly as well as a Hix or George Knight.
  3. 1 point
    try this.It will look solid but in wireframe you will see the difference. hot stuff 2.eps
  4. 1 point
  5. 1 point
    Seems like for this instance one of the new Graphtec Cameo cutters that is coming out this month would fit the bill- cuts up to 12" wide, can contour cut so a color logo could be printed and then cut.... and 12" vinyl is available for printing and cutting....
  6. 1 point
    Sounds like the alternator to me. A good alternator will run the car with no battery installed actually that is how I check them by unhooking the positive terminal if the car stays running the alternator is putting out enough power to run the car. The test they do at auto parts stores like Auto Zone and Advance Auto are questionable at best I bought a refurbished alternator and the alternator light came on and the car quit I took it back to the store they ran the test and said it was good so I bought a new battery and after a while driving it went dead so I took the car to a auto electric repair and they tested the alternator and it was faulty it was replaced there and never had any more problems
  7. 1 point
  8. 1 point
    if you go to the UScutter.com website and find the Copam, go to the options below the cutter and you will see it is a Roland blade, 45 degree for most cutting, 60 degree for more detailed/fine work. Then just go to do a search for Roland blades. http://www.uscutter.com/Copam-CP-Series-Vinyl-Cutter-Professional-model-w-2-year-Warranty-B-CPCCP http://www.uscutter.com/index/page/search?FullText=Search+by+Product+%23+or+Keyword&FullText=roland+blades
  9. -1 points
    i did a Jr. dragster.... customer wanted lettering in one place but I didnt like where it was gonna go.. so i suggested another location and he was THRILLED at the way it turned out...and gave me $50 more than i quoted him..
  10. -1 points
    Flamenco........ with a twist!!
  11. -1 points
    Hey friends I frequent this site so much that I see you like part of my family. I was wondering if you want to share your photo? Lets get to know us better. Come on dont be shy, let us see you! It will be fun dont you think? Ok, Ill be the first. Here I am!