Leaderboard
Popular Content
Showing content with the highest reputation on 03/30/2011 in all areas
-
1 pointcould very well be a memory issue in the cutter - they do have a memory upgrade for the 721. You can also do this same thing by cutting one at a time and changing the origin to maximize your vinyl usage
-
1 pointYou can set your contour cut to be right on the outer edge of the design so you won't have the border. Use jpss for light color shirts and 3G opaque for darks. Cotton and 50/50 shirts will work well for your purpose.
-
1 pointHey Bearly, Email me No charge for this one
-
1 pointIt can still be static, there is alot of static coming off those rolls of vinyl, dry house.etc. Some people also put a dryer sheet in the roll of vinyl or wipe their vinyl with it Wipe down the cutter with Static Guard or spray it around Run the same order that your trying to run, and take the blade holder out, or raise it enough to not cut, See what happens. See if it finishes the order then...
-
1 pointIm running 10.6.6... the only thing I can think of that is helpful is to use SignCut instead of Flexi. Or if not I've read that buying a keyspan helps.
-
1 pointmemory chip, grounded cutter,, keyspan adapter, that about rounds out things
-
1 pointmemory chip for upgrade http://www.uscutter.com/4MB-Chip-for-Refine-Series-Plotters_p_34.html
-
1 pointIf it stops at the same place every time, it's prob a memory issue
-
1 pointIs it stopping at around the same place everytime. If this file larger (or more detailed) than what you've cut in the past?
-
1 pointYou using serial or usb connection?
-
1 pointThat is correct. I have no way of converting newer CS5 files to CS2 or older, unless I purchase newer software, or get someone to do it for me.
-
1 pointyes, they are older files of Illustrator, newer files can be saved as older files, so they can be opened in older software. Another example, I cannot open Illustrator CS5 files in my CS2 Illustrator, the file would would have to be saved to at least a CS2 or older for me to open it. screen print of my Adobe CS2 saving as a version 8.
-
1 pointhttp://support.uscutter.com/index.php?/Knowledgebase/Article/View/67/27/signblazer-elements-update
-
1 pointDo you mean feet or inches? A 8' rear window is pretty big? If it's a 5" decal I just fold some stiff folder material in half or tape it to a small piece of cardboard slightly bigger than the decal and put the decal inside with a stamp on the envelope. If its too big to fit in an envelope then like Scott said I use a tube or box...
-
-1 pointsI think the Chat room would be great. We can always go into the forum and let everyone know we're planning on going into the chat room at a specific time. Are you going to call it: Dome of Silence?
-
-1 pointsI am doing some charity work for March Of Dimes walkers, any idea of this font?
